Blue Sky Plan Manual

This method should only be utilised in an FDA registered establishment. The user should click "Create the indirect bonding tray". The user should check the print screen image of the tray for accuracy, and when it is correct export/print the indirect bonding tray by choosing File > Export Data and selecting the indirect bonding tray to be exported as an STL. The user should use a relevant 3D printer that prints at a resolution of at least 150 microns on the x/y axis and 100 microns on the z axis, to print the exported model in grey or tan model material. The printer control software, printer and model material should be labelled for use together. The material should be a light cured resin which is not recycled or recyclable. Select the indirect bonding tray STL file in the printer control software to be printed in the legally marketed impression tray resin material called NextDent Ortho IBT. Brackets should then be placed into wells created in the shell of the printed indirect bonding tray.